Thiers Issard - An Introduction
Increasing numbers of men are returning to the use of straight razors for their daily shave however some, certainly, are unsure just what to go for. This article should help them make that all-important first buy. So what things to be aware of on your first straight razor? Let us look at exactly what exactly makes a straight razor what it is. A straight razor isalso, essentially, a very simple tool. The scales aren't even really necessary concerning working with the blade to shave with. Their only purpose is to protect the blade once the razor isn't in use, and obviously to provide a guard against the border so that you don't accidentally cut yourself when managing the razor. Most vintage razors you will see for sale have a blade made from high-carbon steel that has been reinforced and tempered so that a very fine - and sharp - edge can be achieved. Some elderly razors are made of cast steel but for the purposes of the article these may be dismissed. Stainless steel, that is a rather new invention, is now used in some contemporary razors and gives a longer-lasting edge but is more challenging to hone back to sharpness once the time comes. Are you hunting about thiers issard razor? Look at the before described site.
The piece of steel that makes the blade of the razor is devised to shape and especially ground to optimal shape and profile. This was of course at one time done by hand but latterly by machine. Not many modern straight razors are hand-made and those that are made in this way are very expensive. When forged and ground, the blade is then completed by honing to a sharp border. Again, this used to be carried out by hand but is now at machine-assisted. It is worth noting that most new razors are not usually'shave ready' and generally need some light honing and stropping prior to use. This is sometimes done by the purchaser or the straight razor can be shipped out to a professional to be honed these may easily by found on the internet and prices are normally quite fair. Properly cared, a straight razor should just need honing perhaps twice yearly, though it is going to require stropping on a special leather strop before each shave. This in effect provides a'new border' for every shave and is one reason that directly razors achieve such good results once the shaving technique is learned. Again, there are lots of tools on the internet to help the newcomer, such as various forums run by razor collectors and enthusiasts that are always pleased to provide help and advice.
So why do some razors cost more than others? Well, some of this price is in the steel that the best quality Swedish carbon steel and also quite high-grade Sheffield carbon steel is more expensive than regular carbon steel. In addition, the level of work in making the blade impacts the price - the greater grinding and forming which is done, the higher the price. It's exactly the same with razors. Deeply-engraved blades, gold-washed blades, gold-plated tangs, fancy patterning and the like all add to the price, as do scales made of progressively more expensive materials. The same blade fitted with standard plastic scales might be a third of the price - or less - compared to one clad in genuine mother-of-pearl - but it will give you the same close shave as its expensive version! With vintage razors there is also the complication of collectable desirability. It's a truism to say that anything is worth what somebody is prepared to pay for it and this is nowhere more true than with collectors. A razor produced by a sought-after maker, or you to finish a set, may bring many times in excess of its initial price, even allowing for inflation. In conclusion, it pays to get the first-time purchaser to pick their very first razor with some care. If a good, workmanlike piece with very little wear and made in Sheffield or Solingen comes up, odds are it will probably be excellent for your first foray into direct razors and as soon as you get used to a single, it's likely that you won't use anything else.